★ GOLD SPONSOR ★
UFCW Local 1529
Standing strong for working families
Powering · Labor Education
THE SOUTH GOT SOMETHING TO SAY· Educate · Organize · Mobilize10 signed onTake the Pledge
Module 5 · Lockout/Tagout
Order the LOTO Sequence
Drag (or use ↑↓ buttons) to put OSHA's 6 steps in the correct order before locking out a machine.
💨
Release Stored Energy
Bleed pressure, drain hydraulic lines, block elevated parts, ground capacitors.
#1
⚡
Isolate the Energy Source
Open the disconnect, close valves, block supports — physically cut off ALL energy: electrical, hydraulic, pneumatic, thermal, gravity, chemical.
#2
🔒
Apply Lock and Tag
Each authorized worker attaches their OWN padlock and tag.
#3
🛑
Shut Down the Equipment
Use the normal stopping procedure (button, switch, valve) to bring the machine to a complete stop.
#4
📣
Notify Affected Employees
Tell every employee whose machine will be locked out before you start.
#5
✅
Verify Zero Energy State
Try to start the machine using normal controls — IT MUST NOT RUN.
#6
